SolidWorks-2013(Advanced)-Video Training <br /> <br />Chapter-1 Sheetmetal Design-Advanced <br /> <br />• Introduction to Sheetmetal design. <br /> <br />• Sheetmetal working. <br />• Introduction and definition. <br />• Sheetmetal processing. <br />• Shearing,bending & drawing concept. <br />• Blanking and punching. <br />• Dies and punch concept. <br />• Tools and accessories. <br />• Bending allowance calculations. <br />• K & Y Factors. <br />• Calculationg K factor. <br />• Sheetmetal bend table. <br />• Bending sheetmetal tips. <br /> <br />• Create base, edge, and miter flanges. <br />• Understand the Feature Manager Design Tree of a sheet metal component. <br />• Create tabs, closed corners, and hems. <br />• Create sketched, lofted, and jog bends. <br />• Break corners of sheet metal components. <br />• Create cuts on the flat faces of sheet metal components. <br />• Create the flat pattern of sheet metal components. <br />• Create a swept flange to a sheet metal component or sketch. <br />• Create sheet metal components from a flat sheet and a flat part. <br />• Create a sheet metal component by designing it as a part. <br />• Design a sheet metal part from a shelled solid model. <br />• Create cuts in a sheet metal component across the bends. <br />• Create cylindrical and conical sheet metal components. <br />• Generate the drawing views of the flat pattern of the sheet metal components. <br />• Create new forming tools. <br />• Edit forming tools. <br /> <br />• Exercises & Projects. <br /> <br /> <br /> <br /> <br />Chapter-2 Surface Design <br /> <br />• Create Extruded, Revolved, and Swept surfaces. <br />• Create Lofted, Planar, and Boundary surfaces. <br />• Create Fill and Radiated surfaces. <br />• Extend, trim, and untrim surfaces. <br />• Offset, fillet, and knit the surfaces. <br />• Create a Mid-surface. <br />• Delete holes. <br />• Replace and delete faces. <br />• Move and copy surfaces. <br />• Thicken a surface body. <br />• Create a thicken surface cut. <br />• Create a surface cut. <br /> <br />• Exercises & Projects <br /> <br /> <br />Chapter-3 Advanced configurations <br /> <br />• Work with equations. <br />• Add global variables. <br />• Suppress and unsuppress features. <br />• Add equations. <br />• Work with configurations. <br />• Create configurations by using design tables. <br />• Change the suppression state of components using the design table. <br />• Change the visibility of components using design table. <br />• Edit and Delete design tables. <br />• Create library features. <br /> <br />• Exercises & Projects <br /> <br /> <br />Chapter-4 Block and Mechanism <br /> <br />• Use tools in the Blocks toolbar. <br />• Save a sketch as a block in the Design Library. <br />• Create mechanisms by using blocks. <br />• Create parts from blocks. <br /> <br />• Exercises & Projects
